|
Plant, shrub and tree transplanting
Super Water Gel can be efficiently applied in planting holes for shrubs
and trees. The rate of application varies from 1 to 2 kg/M3 of backfill
according to the sand content of the soil.
Find here-under the details to proceed a successful plantation
Dig a hole about three times the volume of the roots.Then estimate
approximately the volume of the hole (Length x large x Depth)
in liters or cubic meters
According to the volume, mix 1 to 2 kg ( 2.25 Lbs To 4.5 Hydrated )
of Super Water Gel per cubic meter ( 3 cubic Ft ) of backfill.
The rate of application' depends on the sand content of the soil.
The higher the sand content, the higher the rate of Super Water Gel
The polymer needs to be mixed evenly with the backfill.
Put apart some untreated backfill. The top 5 cm of backfill
shouldn't be amended with polymer to avoid
UV deterioration and water logging on the surface
Put the tree in an up-right position and replace the backfill
progressively into the hole.
Make sure the product is evenly distributed all around the roots.
Finally cover the top surface with 5 cm of untreated backfill.
If plantation is done during a dry spell or under irrigation,
the planting hole will be watered liberally for 2 weeks to
allow a full water absorption of Super Water Gel
Then watering will be divided by half.
If plantation is done under rain fed conditions Super Water Gel ,
will retain large quantities of water and then will release it progressively.
Nevertheless, it is recommendedto water the planting hole liberally for
one week to allow an immediate action of the polymer.
In that case planting of trees and shrubs is made possible in
extreme climate conditions.
Recommended: Super Water Gel Medium
:
|
Turf and Sodding
Super Water Gel can be of assistance throughout the growth cycle
of grasses and sods, especially in germination, quicker growth,
reduction of transportation stress, and root establishment.
The collection and storage of rain and irrigation water can reduce
labor and water costs, as well as provide relief for difficult growth
areas and e hot spots. This application is great for golf courses,
and public and private gardens ! !
Find here-under details to proceed a successful plantation
Work the soil either by hand or with a plow
Spread up to 100 g/m2 = ( 3.5 Oz /21.52 Sq Ft )
( 3.5 Gals. Hydrated ) of Super Water Gel on the top of ground area.
The rate of application' must be adjusted according to climate
and soil conditions but also to plant water requirements.
The polymer can be broadcast by hand or with a
fertilizer distributor for even disbursement.
Incorporate the polymer into the soil under 5 cm ( 2 inches )
of untreated soil and at a depth of 10 cm (4 inches ) maximum.
Incorporation can be done either by hand with a spade, or
mechanically with a disc-plow or a rototiller.
The soil must be leveled evenly.Broadcast the grass seeds or lay
down the sod rolls.
Then roll the soil for compaction. Spread fertilizer if recommended.
Water the field liberally to allow a full absorption of the product.
The planted ground area will be watered normally for one week.
Then irrigation frequency will be divided by half with the same
amount of water as previously.
Recommended Super Water Gel : Medium
|
|